How to improve the efficiency of water pump in wor

2022-09-23
  • Detail

How to improve the efficiency of pump products selling well at home and abroad

in our daily work, if we can significantly improve the working efficiency of the water pump, the production capacity per unit time will be higher, the production cost will be lower, and the same benefit will be greater. So, how to improve the efficiency of the pump? The working efficiency of pump body maintenance depends on the volumetric efficiency and hydraulic efficiency. In our daily work, if the working efficiency of the pump can be greatly improved, then do a good job of cleaning the electromechanical regularly. In unit time, the production capacity is higher, the production cost is lower, and the same benefit is greater. So, how to improve the efficiency of the pump

pump body maintenance

the working efficiency of the water pump depends on the volume efficiency, hydraulic efficiency and mechanical efficiency. Strengthening the maintenance and management of the water pump can improve the volume efficiency, hydraulic efficiency and mechanical efficiency of the water pump. The automobile industry and aircraft manufacturing have always been one of the most important industrial sectors in Britain. After the water pump operates for a period of time, the clearance between the leakage reducing ring and the impeller inlet may increase due to friction, resulting in increased water loss and reduced volumetric efficiency. Check regularly. If the wear clearance of the leakage reducing ring is too large, it should be replaced in time. On the premise of ensuring the operation and design permission, the clearance between the leakage reducing ring and the impeller should be reduced as much as possible

motor maintenance

strengthening the maintenance and management of the motor is very important to improve the output power of the motor. The technical condition of the motor bearing shall be checked regularly, and the bearing shall be replaced when it is seriously worn; Check whether the oil quality and quantity of bearing lubricating oil meet the requirements. Pay attention to whether the bearing has abnormal sound during operation. If there is abnormal sound, immediately find out the cause and deal with it quickly; Pay attention to whether the temperature of the bearing is normal during operation. Generally, the temperature rise of the bearing shall not exceed the ambient temperature by 35 ° C, and the maximum temperature of the bearing shall not exceed 75 ° C. otherwise, it indicates that the technical condition of the bearing has deteriorated, or there are metal objects blocking the bearing

valve maintenance and management

although the structure of the valve is simple, there is generally water leakage on the surface in actual use. This material is used for thermal insulation of solar cells, and the interior is not tightly closed. For this phenomenon, only by strengthening maintenance can the valve be in good working condition. For the old valves that are still in use, a large amount of water leakage and a large amount of power waste are caused by lax closing. For this kind of valves, new valves with better quality, such as butterfly valves, should be replaced

the above are some methods to improve the working efficiency of the water pump in daily work. Only when the daily maintenance work is in place can the working efficiency of the water pump be further improved

Copyright © 2011 JIN SHI